噴淋清洗機在制造業中以多種形式出現，應用范圍廣泛。在脫脂清洗的應用中，還與超聲波清洗相結合，形成清洗烘干線。在超聲波除蠟的清洗過程中，一般用作漂洗工藝段，以降低成本，達到效果。

Spray cleaning machine appears in many forms in the manufacturing industry and has a wide range of applications. In the application of degreasing cleaning, it is also combined with ultrasonic cleaning to form a cleaning and drying line. In the cleaning process of ultrasonic wax removal, it is generally used as the rinsing process section to reduce the cost and achieve the effect.

噴淋清洗機對鋼帶表面不溶于水的固體污垢的去除依賴于表面活性劑的分散。離子型表面活性劑可以吸附在固體顆粒表面，使所有顆粒帶上相同的電荷，從而相互排斥、分散。此時，表面活性劑的親油基團排列在固體顆粒表面，親水基團面向水。

The removal of water-insoluble solid dirt on the surface of steel strip by spray cleaning machine depends on the dispersion of surfactant. Ionic surfactants can be adsorbed on the surface of solid particles to make all particles have the same charge, so as to repel and disperse each other. At this time, the lipophilic groups of the surfactant are arranged on the surface of the solid particles, and the hydrophilic groups face water.

這樣，清洗液與固體顆粒之間的界面張力也可以小于顆粒之間的內聚力，防止顆粒再次團聚在一起。使用全自動噴淋清洗機時，雙手必須牢牢握住高壓清洗機頭。

In this way, the interfacial tension between the cleaning solution and the solid particles can also be less than the cohesion between the particles to prevent the particles from reuniting again. When using the full-automatic spray cleaning machine, both hands must firmly hold the head of the high-pressure cleaning machine.

噴臂轉動平穩：試驗噴臂轉動平穩均勻。噴淋清洗機底部的排水濾網沒有碎屑：噴淋清洗機底部的排水濾網將保留來自儀表盤的污染物。屏幕應至少每天拆下清潔一次，或根據使用頻率而定。堵塞的濾網會阻礙水流和排水，影響噴淋清洗機的清潔性能。

Stable rotation of spray arm: the test spray arm rotates stably and evenly. The drainage screen at the bottom of the spray washer is free of debris: the drainage screen at the bottom of the spray washer will retain pollutants from the instrument panel. The screen should be removed and cleaned at least once a day, or depending on the frequency of use. The blocked filter screen will hinder water flow and drainage and affect the cleaning performance of the spray washer.

儀器框架聯軸器與歧管正確對齊。確保噴淋清洗機的水/洗滌劑入口與洗滌架歧管正確對齊。不對中會影響水流、水分布和水壓，可能導致墊圈運行不正確。水壓不足會使噴淋臂無法正常工作，削弱機械清洗效果。

The instrument frame coupling is correctly aligned with the manifold. Ensure that the water / detergent inlet of the spray washer is correctly aligned with the washing rack manifold. Incorrect distribution of water pressure and water flow may result. Insufficient water pressure will make the spray arm unable to work normally and weaken the mechanical cleaning effect.

每次使用前檢查清洗機和電源線是否損壞。如果注意到有損壞，請停止使用，維修之后方能再次使用。檢查清洗劑的量，確保整個輪班期間有足夠的清洗劑。清洗槽應至少每天徹底清洗、消毒、沖洗和烘干。根據器械的污染程度和/或清洗溶液是否污染，應更頻繁地進行清洗槽維護。

Check whether the cleaning machine and power cord are damaged before each use. If you notice any damage, please stop using it and use it again after maintenance. Check the amount of cleaning agent to ensure that there is enough cleaning agent during the whole shift. The cleaning tank shall be thoroughly cleaned, disinfected, flushed and dried at least every day. According to the degree of contamination of the instrument and / or whether the cleaning solution is contaminated, the cleaning tank maintenance should be carried out more frequently.

噴淋清洗機檢查的一些關鍵點內容講解完畢，如果您想知道更多關于這方面的內容就來關注我們的網站m.glwh.com.cn吧！

Some key points of spray cleaning machine inspection have been explained. If you want to know more about this, please pay attention to our website m.glwh.com.cn Com!